We – EPG Team the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Intense RUBBER KNEADER
Mixing chamber:
It is composed of a “W” form human body and two aspect boards created of higher top quality steel plates by means of extrusion forming and welding, which are jacked to consider the circulation of cooling h2o or steam. It is plated with difficult chrome on its internal walls.
Thermal Resistance:
There is a plug-in thermal resistance in middle segment of the bottom of the chamber to be related to electrical method to inspect and display the temperate.
Rotor:
It is developed to the hollow blades of Banbury sort. The hollows are linked with axial gap of rotor shaft used as cooling or heating passage. The leading edges of blades and the stop faces of ~ rotor shaft are surface welded with cobalt-foundation hard alloy and grinding, then plating with tough chrome and polishing.
Cooling/heating program:
A common piping program is adopted for either cooling or heating content in mixing operation. Through the method cooling drinking water or steam is fed in 3 techniques to the cavities of the rotors blades, the mixing chamber and the top ram.
Tilting system:
It is composed of a rotor with brake, cycloidal equipment reducer, TP sort worm and worm equipment, etc.. It is ready to actuate the mixing chamber tilting by 140° about the entrance rotors.
Dust sealing system:
At the joint among the prime of the mixing chamber and the cantilevered arm of the device body, the dust sealing assemblies with curved slotted partings are used acquiring an superb and trustworthy sealing purpose.
The stop encounter of the rotor is sealed by stop make contact with sealing with nor oil-lubrication and is seals well and is use-resistant and durable.
Principal driving system:
The portion is created up with main motor, reducer, connecting gears. It realizes odd-speed rotation of the rotors with managing encounter a single other.
Pneumatic control method:
Pneumatic manage program is managed by XG get. The bi-directional air cylinder helps make the ram up or down. In situation the above load happens in the mixing chamber, the prime ram can be raised immediately or manually if needed, so as to safeguard motor from overload.
Electric powered handle technique:
Imported PLC system and electrical control components which are all imported products or imported technological innovation merchandise are adopted in the electric manage method as to elevate handle trustworthiness.
parameters of rubber kneader
| Model Merchandise |
X(S)N- 1×12~fifty eight |
X(S)N- 3×32 (6-sixty) |
X(S)N- 10×32 |
X(S)N- 20×32 |
X(S)N- 35×30 |
X(S)N- 55×30 |
X(S)N- 75×30 |
X(S)N- 110×30 |
X(S)N- 150×30 |
X(S)N- 200×30 |
||
| Total quantity of mixing chamber | L | three | eight | 25 | forty five | 75 | a hundred twenty five | a hundred and eighty | 250 | 325 | 440 | |
| Wor ept volume of mixing chamber | L | 1 | three | ten | 20 | 35 | fifty five | 75 | a hundred and ten | one hundred fifty | two hundred | |
| Driving motor electricity | Kw | 4 | five.5 | 15 | 30 | 55 | 75 | a hundred and ten | 185 | 220 | 280 | |
| Tilting motor electricity | Kw | Handbook | .fifty five | one.1 | 1.five | 2.2 | 2.two | four | 4 | 5.5 | 7.five | |
| Tilting angle | . | ≤140 | 135 | one hundred forty | 140 | one hundred forty | one hundred forty | 140 | 140 | a hundred and forty | a hundred and forty | |
| Rotational velocity of the rotor (entrance/rear) | r/min | 12~fifty eight | 6-sixty 32/24.5 |
32/23.five | 32/25 | 30/24.five | thirty/24.five | 30/24.5 | 30/24.five | thirty/24.five | 30/24.five | |
| Pressure of compressed air | Mpa | .5-.8 | .5-.8 | .5-.eight | .5-.eight | .5-.eight | .6-.8 | .6-.eight | .6-.8 | .6-.eight | .6-.eight | |
| Capacity of compressed air | M³/min | ≥0.3 | ≥0.three | ≥0.five | ≥0.7 | ≥0.nine | ≥1. | ≥1. | ≥1.5 | ≥2. | ≥2. | |
| Pressure of cooling drinking water (rubber mixing) | Mpa | .2-.four | .2-.four | .2-.4 | .2-.4 | .3-.four | .3-.4 | .3-.four | .3-.four | .3-.four | .3-.four | |
| Pressure of heating steam (plastics mixing) | Mpa | .5-.eight | .5-.8 | .5-.8 | .5-.eight | .5-.8 | .5-.8 | .5-.eight | .5-.eight | .5-.8 | .5-.eight | |
| Overall dimension | L | mm | 1400 | 1660 | 2580 | 2630 | 3200 | 3280 | 3330 | 3930 | 4200 | 4520 |
| W | 760 | 960 | 1300 | 1520 | 1900 | 1930 | 2620 | 3000 | 3300 | 3400 | ||
| H | 1914 | 1750 | 2280 | 2550 | 2950 | 3070 | 3340 | 3660 | 3900 | 4215 | ||
| Weight | Kg | 800 | 2000 | 3300 | 4000 | 6500 | 7800 | 10500 | 16000 | 19500 | 22500 | |
The use of first products manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the listed substitution elements contained herein are not sponsored, authorized, or created by the OEM.
